Flashdos Utility Command Line Options - Intel NetStructure MPCBL0001 Technical Product Specification

®
Intel NetStructure MPCBL0001 High Performance Single Board Computer
Contents
Table 97.

Flashdos Utility Command Line Options

Command Line Parameter
/b [option] bios_image
where possible [option] values are:
• /z - do not clear the CMOS
• /zc - update the CMOS from image
/i [bios_image]
/r [options] bin_image
where possible [option] values are:
• /aAddress - physical address in hex
• pPage - page number in decimal
• /sSize - image size in decimal
/m
/b cmos_image
/r cmos_image
/q
146
Description
Program a BIOS image to primary firmware hub (FWH0)
Display BIOS system information
Read the flash image and store to a file
Mirror image where all the operational codes and CMOS settings
are copied from FWH0 to FHW1 (redundant BIOS flash bank)
Backup current CMOS settings to a file
Restore CMOS settings from a file
Force non-interactive mode (assumes "yes" for all prompts)
Technical Product Specification
Order #273817