Table of Contents
Advertisement
Hardware Management Overview
The Intelligent Platform Management Controller (IPMC) is an Intel-designed baseboard
management controller device manufactured by Philips Semiconductor* for Intel.
The high-level architecture of the baseboard management for MPCBL0001 is represented in the
block diagram below.
Figure 3.
Hardware Management Block Diagram
Watchdog Timer
The main processors communicate with the IPMC using the Keyboard Controller Style (KCS)
interface. Two KCS interfaces are available for the BIOS to communicate to the IPMC. BIOS uses
SMS interface for normal communication and SMM interface when executing code under systems
management mode (SMM). The base address of the LPC interface for SMS is 0xCA2 and 0xCA4
for SMM operation. Besides that, the BIOS is able to communicate with the IPMC for POST error
logging purposes, fault resilient purposes, and critical interrupts via the KCS interface.
The memory subsystem of the IPMC consists of a flash memory to hold the IPMC operation code,
firmware update code, system event log (SEL), and a sensor data record (SDR) repository. RAM is
used for data and occasionally as a storage area for code when flash programming is under
execution. The field replacement unit (FRU) inventory information is stored in the nonvolatile
memory on ADM1026. The flash memory can store up to 64 KBytes of SEL events and SDR
information, while the ADM1026 can store up to 512 bytes of FRU information. Having the SEL
and logging functions managed by the IPMC helps ensure that 'post-mortem' logging information
is available even if the system processor becomes disabled.
Technical Product Specification
Order #273817
®
Intel NetStructure
MPCBL0001 High Performance Single Board Computer
ADM 1026
Memory
CP U
(Low Voltage Intel
®
Xeon™)
Intel
®
E7501 Memory
Controller Hub (MCH)
ICH3
Intelligent Platf orm
Management Controller
(IPMC)
Flash
SRAM
Contents
NOTE:
I2C Bus
KCS interf ace
Logic Connection
IPMB A
Backplane
(P10)
3
29
Advertisement
Table of Contents
