Determining The Batteries' Condition - Datamax LP3 User Manual

Determining the Batteries' Condition

The battery status LED displays the batteries' condition. When
the battery status LED is solid red, the batteries must be
charged; when solid orange, the batteries are at low power;
when solid green, the batteries are charged. The batteries'
voltage varies between 6.2 and 8.4 volts.
Figure 12
For information on battery error conditions, see
Control Panel on page 15
Caution: There is a risk of explosion if the battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Caution: The operating temperature of this portable
printer is 45° C. However, the operating temperature
when used with Datamax-O'Neil power supply part
number 220240-100 for charging the portable printer
is limited to 40 degrees C. Please charge the printer in
a suitable location that meets this temperature
requirement.
Caution: Please only use the Datamax-O'Neil part
number 220240-100 power supply with this product.
Battery 2
Battery 1
.
6
S U Y
ETTING P
Using the
P
OUR RINTER