Battery Status Led - Datamax LP3 User Manual

Battery Status LED

Battery
Status LED
Red (solid):
The batteries
have less than
5% power.
Orange (solid):
The batteries
have less than
25% power.
Green (solid):
The batteries
are near, or at,
full capacity.
Red to orange
flash - fast
Orange flash -
slow
Orange flash -
fast
Description
• If A/C power is not plugged
in, the printer will soon turn
off.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• If A/C power is not plugged
in, indicates the batteries
are low.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• If A/C power is not plugged
in, batteries are well
charged.
• If A/C power is plugged in,
the LED is solid and
charging is complete.
Battery voltage is too high.
Charge has timed out.
Internal code error.
U
SING THE
Action
• Charge batteries.
• None. Wait for the
charge LED to turn
green.
• Charge batteries.
• None. Wait for the
charge LED to turn
green.
None.
None.
Replace battery.
Restart battery charge
(battery may be bad).
Remove batteries, then
re-connect A/C power.
16
C P
ONTROL ANEL