Using The Control Panel; Audio Indicators - Datamax LP3 User Manual

LP 3 LABEL PRINTER USER'S GUIDE

Using the Control Panel

The tables on the following pages document the following:
• Audio Indicators on page 15
• Battery Status LED on page 16
• Power Button/LED on page 17
• Media Function Button/LED on page 17
• Radio Button/LED on page 18
Battery Status
LED

Audio Indicators

Beep(s) Description
1 short Printer wakes up.
2 short Out of paper.
3 short Low battery.
1 very short RF power is on.
Note:
you press the RF power button
and the RF power was off.
2 very short RF power is off.
Note:
you press the RF power button
and the RF power was on.
1 long Boot code is starting or
restarting.
8 short CRC error in firmware.
Power Button/
LED
This beep occurs when
This beep occurs when
Media Function
Button/LED
15
Radio
Button/LED
Action
None.
Install paper.
Charge battery.
None.
None.
Redownload firmware.
Redownload firmware.