Btx Heatsink Setup With Srm; Srm Alignment On Any Btx Board; Mounting The Standoff For Btx Heatsink; Casing With "Support And Retention Module - Intel Core 2 Duo User Manual

Figure 18.

Mounting the Standoff for BTX Heatsink

3.3

BTX Heatsink Setup with SRM

This section describes BTX casing which uses "Support and Retention Module (SRM)" as
shown in
Note: SRM is not included in this development kits.
Figure 19.

Casing with "Support and Retention Module"

3.3.1

SRM Alignment on any BTX Board

Attach the BTX Thermal Module Assembly (TMA) over the processor to the Support and
Retention Module (SRM) by following procedures described below.
® TM
Intel Core 2 Duo Processor and Intel
User's Manual
28
Intel Core 2 Duo Processor and Intel Q35 Express Chipset—Setting Up and Configuring the
Figure 19.
®
Q35 Express Chipset Development Kit
Development Kit
October 2007
Order Number: 318476001US