Cpu Fan Location - Intel Core 2 Duo User Manual

Setting Up and Configuring the Development Kit—Intel Core 2 Duo Processor and Intel Q35
Express Chipset
2. Set jumpers to default positions. Refer to
3. Install the processor and ensure the 4-pin CPU fan power connector is installed on
header shown in
Figure 23.

CPU Fan location

4. Install the DDR2 DIMM in the Channel A Slot 0 connector. DIMMs should never be
inserted or removed unless the power supply is disconnected from the AC power
source. Refer to
5. Connect a SATA hard drive, USB keyboard, USB mouse, and VGA monitor (video
card is optional).
6. Connect a 2x12 standard power supply and 2x2 standard power supply as well.
Refer to
7. Plug the power cable into the back of the power supply, leaving the switch in the
OFF position.
8. Once the board is set up, plug the cord into the power source. Switch on the power
supply.
9. Press the power button. Refer to
location.
October 2007
Order Number: 318476001US
Figure 23.
Section 2.5 for system memory configuration.
Figure 24 for the location.
® TM
Intel Core 2 Duo Processor and Intel
Section 2.8.1 for default positions.
Figure 24 or Figure 1 for power-on button
®
Q35 Express Chipset Development Kit
4-pin CPU Fan Power
User's Manual
31