Receiving Stations - Integra DTM-5.3 Instruction Manual

Receiving stations

Please make sure that the
T-2 MONITOR
For the remote controller, press the RCVR/Tape mode button before performing the
procedure in this section.
Standby/On
Standby
Speakers
A B
Zone 2 Off
Phones
Tuning the radio (Manual tuning)
When the frequency is not known (Manual tuning)
1 Press the FM or AM button.
FM AM
2 Use the Tuning buttons (or Tuning Down and Up
buttons on the remote controller) to change the fre-
quency.
(Up).....the frequency increases.
(Down).....the frequency decreases.
Tuning
• The frequency is changed in 100 kHz steps in FM and
10 kHz in AM each time a tuning selector button is pressed.
• If a button is held continuously for more than 0.5 seconds,
the frequencies are scanned automatically (FM auto tuning
mode). When a broadcast is received, scanning stops.
20
and AUDIO MUTE indicators are not lit.
Tuning
Number buttons
1 ABC
4 JKL 5 MNO
7 STU
Direct Tuning 0/10
Display Direct Tuning Memory
Tape 2
DVD Video Monitor Tape 1 FM AM Phono
FM AM
or
FM MUTE TUNED
ON STEREO
MHz
TUNED
kHz
Master Volume
2 DEF 3 GHI
6 PQR
8 VWX 9 YZ-
/ Scan
Clear
FM Mode Character
Bass Treble Balance
CD
L R
DTM-5.3
Direct Tuning
Tuning the radio (Direct tuning)
When the frequency is known (Direct tuning)
1 Press the FM or AM button.
FM
2 Press the Direct Tuning button (or DRCT Tune button on
the remote controller).
The "-- --" will flash for 16 seconds in the frequency display.
Direct Tuning
3 Enter the frequency by pressing the number buttons
CH
while the cursors are flashing.
1 ABC 2 DEF
CH
4 JKL 5 MNO
7 STU 8 VWX
/
0/10
Example: 88.1MHz
• If you enter a frequency that is out of range, the unit will return
to the previous frequency. If this happens, repeat the procedure.
DRCT
Tune
Tuning
Down
FM
AM
FM MUTE
ON
3 GHI
FM MUTE
ON
6 PQR
9 YZ -
FM MUTE
ON
8 8 1
Number
buttons
RCVR/Tape
Tuning
Up
AM
or
TUNED
STEREO
MHz
CH
TUNED
STEREO
MHz
CH
TUNED
STEREO
MHz
CH