Recording A Source - Integra DTM-5.3 Instruction Manual

Recording a source

Standby/On
Standby
Speakers
A B
Zone 2 Off
Phones
Recording an audio source
Please read the instruction manuals concerning operation of each
unit.
1 Insert a blank tape into the tape deck.
2 Press the button (other than Tape 2 Monitor) for the
source you wish to record.
Tape 2
DVD Video Monitor
• When DVD or Video is selected, the audio portion of the pro-
gram will be recorded.
• When FM or AM is selected, set the tuner to the station from
which you wish to record.
• When TAPE 1 is selected, it will record to TAPE 2.
• When either DVD, Video, FM, AM, Phono or CD is selected,
you will be able to record to both TAPE 1 and TAPE 2.
3 Put the tape deck in recording mode. Begin playing the
source.
Set the proper recording level using the recording controls on
the tape deck. During recording and dubbing operations, if any
controls (bass, treble etc.) on the unit are changed, the tone will
not change.
Note:
Recording from TAPE 2 to TAPE 1 is not possible.
Recording
Tape deck
(TAPE 1, TAPE 2)
24
1 ABC
4 JKL
7 STU
Direct Tuning
Display Direct Tuning Memory
Tape 2
DVD Video Monitor Tape 1 FM AM Phono
Input selector buttons
Tape 1
FM AM Phono
DTM-5.3
Playback
Turntable
CD player
VCR, VDP
Master Volume
2 DEF 3 GHI
5 MNO 6 PQR
8 VWX 9 YZ-
0/10 / Scan
Clear
FM Mode Character
Bass Treble Balance
CD
L R
DTM-5.3
Tape-to-Tape dubbing
1 Load the original tape in the TAPE 1 tape deck and a
blank tape in the TAPE 2 tape deck.
2 Press the Tape 1 button.
CD
3 Place the TAPE 1 tape deck in playback mode and the
TAPE 2 tape deck in recording mode.
Tape deck (TAPE 2)
Tape 1
DTM-5.3
Recording
Tape deck (TAPE 1)
Input selector
Playback