Integra DTM-5.3 Instruction Manual page 25

Recording a source
Standby/On
Standby
Speakers
A B
Zone 2 Off Display
Phones
DVD
Video disc player (or video camcorder) to VCR
recording
Video disc programs can be recorded onto a VCR (VIDEO).
1 Load a disc in the video disc player, and a blank tape in
the VCR (VIDEO).
2 Press the DVD button.
DVD
3 Begin playback on the video disc player and begin
recording on the VCR.
DTM-5.3
Recording
VCR (VIDEO)
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ-
Direct Tuning 0/10 / Scan
Clear
Direct Tuning Memory FM Mode Character
Tape 2
Video Monitor Tape 1 FM AM Phono CD
Input selector buttons
Playback
DVD
Master Volume
Bass Treble Balance
L R
DTM-5.3
Adding new sound to a video tape during video
editing
During video tape editing, you can add sound to the recording VCR
from various audio program sources.
1 Insert the disc or tape from which you wish to record into
the DVD or VCR connected to the DVD connector.
2 Insert a blank video tape in the VCR connected to the
VIDEO connector.
3 Press the DVD button.
4 Select the audio program source (Tape 1, FM, AM,
Phone, CD).
Tape 1 FM
5 Begin playback of the video connected to the DVD con-
nector. Start the sound source, then start recording on
the VIDEO.
Refer to the video disc player, video camcorder or VCR instruction
manuals for additional information.
Video
playback recording
DVD, VCR (DVD)
VCR (VIDEO)
Input selector
DVD
AM Phono CD
DTM-5.3
Video Audio Audio
recording playback
Turntable
CD player
Tape dack
25