Connecting The Power - Integra DTM-5.3 Instruction Manual

Connecting the power

• Before plugging in the unit, confirm that all connections have been made properly.
• Before turning on the power, be sure that the VOLUME knob is fully turned counterclockwise.
• Turning on this unit's power may cause a momentary power surge, which might interfere with other electrical equipment, such as comput-
ers. If so, connect the unit to a wall outlet on a different circuit.
Plug the power cord into the AC INLET, then plugging the power
cord plug into an AC outlet puts the unit in Standby mode (the
Standby indicator is lit).
Pressing the Standby/On button turns on the unit and lights up the
display. If this switch is pressed again, the unit returns to Standby
mode.
Standby indicator
Standby/On button
Standby/On
Standby
Speakers
A B
Zone 2 Off Display Direct
Phones Tape 2
DVD Video Monitor Tape 1
16
Master Volume
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ-
Direct Tuning 0/10 / Scan
Clear
Tuning Memory FM Mode Character
Bass Treble Balance
FM AM Phono CD
L R
DTM-5.3
To wall outlet
On the remote controller, press the On button to turn on the power
to the DTM-5.3, then press the Standby button to place the unit in
Standby mode.
On button
Standby button