Integra DTM-5.3 Instruction Manual
Integra DTM-5.3 Instruction Manual

Integra DTM-5.3 Instruction Manual

Integra instruction manual av receiver dtm-5.3
Hide thumbs Also See for DTM-5.3:

Advertisement

AV Receiver
DTM-5.3
Instruction Manual
Thank you for purchasing the Integra AV Receiver.
Please read this manual thoroughly before mak-
ing connections and plugging in the unit.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Important Safeguards..........................2
Precautions ...........................................3
Features .................................................4
Supplied accessories ...........................4
Front panel description........................6
Rear panel description ........................8
Connecting components .................10
Connecting speakers ........................12
Connecting antennas .......................13
(Zone 2) ............................................14
Connecting the power......................16
batteries ...........................................17
Basic operations .................................18
Receiving stations ..............................20
Entering station names ......................23
Recording a source ...........................24
Using Tape 2 Monitor .........................26
Troubleshooting guide .......................31
Specifications .......... back cover page

Advertisement

Table of Contents
loading

Summary of Contents for Integra DTM-5.3

  • Page 1: Table Of Contents

    AV Receiver DTM-5.3 Instruction Manual Thank you for purchasing the Integra AV Receiver. Please read this manual thoroughly before mak- ing connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
  • Page 2: Before Using

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3: Precautions

    2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Integra/Onkyo authorized service station. 3. Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth.
  • Page 4: Features

    This period is shorter when the unit is exposed to a highly humid climate. Supplied accessories Check that the following accessories are supplied with the DTM-5.3. Remote controller RC-477S (1) Batteries (AA, R6 or UM-3) (2)
  • Page 5: Facilities And Connections

    Use this button to set the frequency. After pressing this but- ton, use the number buttons to input the frequency. +10 button (CD or DVD mode) This button is used as a numeric key to control the Integra/ Onkyo CD or DVD player connected by using the nals.
  • Page 6: Front Panel Description

    Front panel description This section identifies and explains the controls and displays on the front panel of the DTM-5.3. Front panel Standby/On Standby Speakers Zone 2 Phones Display STEREO MODE AUTO MONO Standby/On button Press this button to turn on the power to the DTM-5.3. The display indicators light up.
  • Page 7 Front panel description TUNED indicator This indicator lights up when the unit receives a radio sta- tion signal G. STEREO indicator The indicator lights up when the unit receives an FM ste- reo radio station signal. H. MEMORY indicator The indicator lights up when you press the Memory but- ton to program a radio station.
  • Page 8: Rear Panel Description

    Rear panel description This section identifies and explains how to use the terminals found on the rear of the DTM-5.3. Before connecting your audio and video compo- nents, be sure to read this section carefully and then proceed to the explanations on how to connect each individual component (see page 10).
  • Page 9 DTM-5.3 automatically switches to that component. If the power cord for an nected to the AC OUTLET on the DTM-5.3, or if the DTM- 5.3 is turned on, this function will not work. Direct change function When the play button is pressed on an nent, the input source selected at the DTM-5.3 automatically...
  • Page 10: Connecting Components

    Connecting components This section explains how to connect the main components to the DTM-5.3 in the standard manner. • Be sure to always refer to the instruction manual that came with the component that you are connecting. • Do not plug in the power cord until all connections have been made.
  • Page 11 Connecting components Example of video equipment connections DVD Player (DVD) AUDIO OUTPUT ANTENNA PHONO If there should be interference between the TV and this unit, place this unit as far from the TV as possible. We do not recommend the use of a common TV/FM antenna. (Refer to “Connecting antennas” on page 13.) Monitor TV VIDEO OUTPUT VIDEO IN...
  • Page 12: Connecting Speakers

    • Do not connect more than one speaker cable to one speaker terminal. Doing so may damage the DTM-5.3. PHONO Connecting the speaker cable 1. Strip away 5/8 inch (15 mm) of wire insulation.
  • Page 13: Connecting Antennas

    Connecting antennas To use the tuner of the DTM-5.3, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception is best performed while listening to a station broadcast.
  • Page 14: Connecting The Remote Zone (Zone 2)

    The DTM-5.3 allows you to connect an additional set of speakers and place them in a different room or an area separated for listening to music. This other room or area is referred to as the remote zone (Zone 2), while the room in which the DTM-5.3 is referred to as the main zone.
  • Page 15: Operating Components Not Reached By The Remote Controller Signals (Ir In/Out)

    Controlling the DTM-5.3 in the main room from a remote zone (Zone 2) The IR IN input allows you to control the DTM-5.3 from a remote zone (Zone 2) using the remote controller, even though the remote zone may be physically separated. The diagram below illustrates how to make the proper connections for the remote zone.
  • Page 16: Connecting The Power

    Video Monitor Tape 1 Phono On the remote controller, press the On button to turn on the power to the DTM-5.3, then press the Standby button to place the unit in Standby mode. Master Volume 3 GHI 6 PQR 9 YZ-...
  • Page 17: Installing The Remote Controller Batteries

    • Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation. • If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate. DTM-5.3 approx. 5 m (16 feet)
  • Page 18: Setup And Operation

    When you operate the compact disc player or tape deck, the input selector on the DTM-5.3 switches automatically to the desired component. It is not necessary to switch the DTM-5.3’s input selector when Remote controller you change listening sources. Note: This direct change function does not work when Zone 2 is being controlled.
  • Page 19 The sleep timer can power off the system after a specified time period. To operate this function, use the remote control supplied with your DTM-5.3. 1 Start playing the source you would like to listen to CD, tape Speakers or radio broadcast.
  • Page 20: Receiving Stations

    Character Bass Treble Balance Tape 1 Phono DTM-5.3 Direct Tuning Tuning the radio (Direct tuning) When the frequency is known (Direct tuning) 1 Press the FM or AM button. 2 Press the Direct Tuning button (or DRCT Tune button on the remote controller).
  • Page 21 FM Mode Character Bass Treble Balance Phono DTM-5.3 FM Mode Memory Programming radio stations A total of 40 stations can be stored in the memory. 1 Select the frequency that you wish to store in memory. (Refer to “Tuning the radio” on page 20.) 2 Press the Memory button.
  • Page 22 2 Press the FM Mode button while holding down the Mem- ory button. “--” will appear on the display. Once the preset station has been cancelled, you can use the memory location to store another station. Scan Balance DTM-5.3 FM MUTE TUNED STEREO AUTO MONO MONO...
  • Page 23: Entering Station Names

    Memory FM Mode Character Bass Treble Balance Phono DTM-5.3 Character 5 Press the Character button to store the entered characters. Character If a button is not pressed within 16 seconds, the operation will end automatically. indicate a space. • Press the Display button when you wish to check the frequency while you are entering the characters.
  • Page 24: Recording A Source

    During recording and dubbing operations, if any controls (bass, treble etc.) on the unit are changed, the tone will not change. Note: Recording from TAPE 2 to TAPE 1 is not possible. DTM-5.3 Recording Tape deck (TAPE 1, TAPE 2) Master Volume...
  • Page 25 1 Load a disc in the video disc player, and a blank tape in the VCR (VIDEO). 2 Press the DVD button. 3 Begin playback on the video disc player and begin recording on the VCR. DTM-5.3 Recording VCR (VIDEO) Master Volume 1 ABC...
  • Page 26: Using Tape 2 Monitor

    Using a graphic equalizer 1 Connect the graphic equalizer to the TAPE 2 connectors on the rear panel of the DTM-5.3. 2 If a second tape deck is used, connect it to the tape deck con- nectors on the graphic equalizer.
  • Page 27: Enjoying Music In The Remote Zone

    Bass Treble Balance Tape 1 Phono DTM-5.3 Input selector buttons Zone 2 (A-BUS or IR) operation in the zone 2 room 1 Press the On button on the remote controller. The power to the Zone 2 devices turned on. 2 Select an input source.
  • Page 28: Remote Controller

    Programming the remote controller ID (This procedure is not required if you are using only one DTM-5.3.) If you are using multiple DTM-5.3 units, all units will respond to an operation on one of the remote controllers. To avoid this, you can establish up to nine ID numbers for the remote controllers.
  • Page 29: Controlling Other Components

    Controlling other components You can operate an -connected Integra/Onkyo CD player, cassette tape deck or DVD player using the remote controller provided with the DTM-5.3. Numeric buttons Numeric buttons Controlling an Integra/Onkyo CD player connector of the Integra/Onkyo compact disc player must be connected to the DTM-5.3.
  • Page 30 Controlling other components Controlling an Integra/Onkyo cassette tape deck connector of the Integra/Onkyo cassette tape deck must be connected to the DTM-5.3. 1 Press the RCVR/Tape button. 2 Press the desired operation button. : Plays side A (the side facing the front) of the tape.
  • Page 31: Appendix

    Appendix Troubleshooting guide If a problem occurs, while you are using the remote controller, first operate the unit using the front panel controls to confirm that it is not due to a malfunction (or expired batteries) of the remote controller. Trouble No power.
  • Page 32: Specifications

    17.2 dBf, 2.0 µV (75 ohms) Stereo: 37.2 dBf, 20 µV (75 ohms) Capture Ratio: 2.0 dB Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales &...

Table of Contents