Restoring Original Factory Default Settings - ATEN Master View CS-88A User Manual

CS-88A User Manual

Restoring Original Factory Default Settings

You can restore the original factory default settings for the CS-88A. The
original password for the default administrator account is restored; all
administrator and user accounts are removed from the system. Only the station
name and date and time are retained. This procedure requires the use of a
jumper cap.
1. Turn off the CS-88A and unplug the power cord.
2. Remove the cover of the CS-88A.
3. Place a jumper cap over pins 1-2 of the J22 jumper on the mainboard.
4. Plug in the power cord and turn on the CS-88A. The following directions
appear on the KVM console screen:
USERNAME AND PASSWORD INFORMATION AND PORT/USER
INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE
SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN
RESTART.
5. Turn off the CS-88A and unplug the power cord.
6. Remove the jumper cap from pins 1-2 of the J22 jumper.
7. Replace the cover on the KVM switch. Plug in the power cord and turn on
the CS-88A.
8. You should now use the default username and password to log in to the
CS-88A.
44