Restoring Factory Default Settings - ATEN KM0032 User Manual

Restoring Factory Default Settings

You can restore the factory default settings and the default login settings for the
Matrix KVM Switch.
Note: When restoring the default login settings, all super administrator,
administrator, user, and group accounts are deleted.
To restore the factory default settings (see page 196), or the default login
settings, do the following:
1. Power off the switch and remove its housing.
To restore the factory default settings, use a jumper cap to short the
mainboard jumper labeled J4.
To restore the default login settings, use a jumper cap to short the
mainboard jumper labeled J3.
2. Power on the switch.
3. When a message appears on the console screen informing you that the
factory default settings have been restored (or the default Username and
Password has been restored), power off the switch.
4. Remove the jumper cap from the jumper.
5. Close the housing and start the switch.
Appendix
197