Table of Contents
Advertisement
CS-88A User Manual
F4: ADM
F4 is an Administrator only function. It allows the Administrator to configure
and control the overall operation of the OSD. To change a setting use the Up
and Down Arrow Keys to move the highlight bar to it then press [Enter].
In order for this item to appear on the OSD Main Screen, a login with the
Administratorís Username and Password is required. See OSD Overview,
page 19, for setting the Administrator's Username and Password the first time
the OSD is invoked.
After you select an item, a submenu with further choices for you to select from
appears. Double Move the Highlight Bar to it then press [Enter]. An icon
appears before the selected choice so that you know which one it is. The
settings are explained in the following table:
Setting
SET USERNAME
AND
PASSWORD
SET LOGOUT
TIMEOUT
26
This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select the Administrator field or one of the User fields,
a screen that allows you to key in your username and password
appears. The password may be up to 12 characters long, and
can consist of any combination of letters and numbers
(A–Z, 0–9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password, use
the backspace key to erase individual letters or numbers.
Note: To clear all Username and Password information and have
the Switch return to its default (empty) state, see Restoring Original
Factory Default Settings, page 44.
If there is no input from the console for the amount of time set with
this function, the Operator is automatically logged out. A login is
necessary before the console can be used again.
This enables other Operators to gain access to the computers
when the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number from
1–180 minutes, then press [Enter]. If the number is 0 [zero], this
function is disabled. Default is 0 (disabled).
Function
(Continues on next page.)
Advertisement
Table of Contents
