Powering Off And Restarting - ATEN Master View CS-88A User Manual

CS-88A User Manual

Powering Off and Restarting

If it becomes necessary to Power Off one of the CS-88A units, before starting
it back up you must do the following:
1. Shut down all the computers that are attached to the unit. If there are
Master View stations cascaded down from it, all the cascaded stations and
the computers attached to them must be shut down, as well.
Note: 1. You must unplug the power cords of any computers that have the
Keyboard Power On function. Otherwise, the unit will still
receive power from the computers.
2. If the unit is operating under external power, unplug the power
adapter cable.
2. Wait 10 seconds, then plug the stations back in, starting with the lowest
stations in the cascade and working back to the station you originally shut
down.
3. After all the Master View's are up, power On the computers, starting with
the ones attached to the lowest stations in the cascade and working back to
the station you originally shut down.
16