Table of Contents
Advertisement
Port Selection
The CS-88A provides three port selection methods to access the computers on
the installation: Manual; OSD (On Screen Display) menus, and Hotkey. OSD
Operation is discussed in the next chapter; Hotkey Port Selection is discussed
detail in Chapter 5.
Manual Port Switching
Simply press the appropriate Port Selection Switch on the Master View's front
panel. After you press the switch, the Selected LED lights to indicate that the
port has the KVM focus. The OSD automatically switches to highlight the
computer that you have selected.
Note: 1. On a cascaded installation, you must press the Port Selection switch
on the Master View Station that connects directly to the computer you
want to access.
2. Simultaneously pressing Port Selection buttons 7 and 8 on the First
Stage unit initiates the Auto Scan feature (see F7: SCAN, page 29), in
which all the ports currently selected for Quick View scanning (see
SET QUICK VIEW PORTS, page 28), are cycled through. The length
of time spent on each port is determined with the Scan Duration
setting under the OSD's F3 SET function (see page 24).
Chapter 3. Basic Operation
17
Advertisement
Table of Contents
