Configuring The Web Server Settings - Cisco Small Business AP541N Administration Manual

Administration

Configuring the Web Server Settings

Configuring the Web Server Settings
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
If you enabled the Log Relay Host, clicking Apply activates remote logging. The
access point sends its kernel messages real-time for display to the remote log
server monitor, a specified kernel log file, or other storage, depending on how you
configured the Log Relay Host.
If you disabled the Log Relay Host, clicking Apply disables remote logging.
The access point can be managed through HTTP or secure HTTP (HTTPS)
sessions. By default both HTTP and HTTPS access are enabled. Either access
type can be disabled.
To configure the Web server settings, click the Web Server tab.
Figure 31 Configuring Web Server Settings
6
125