1
STEP 3
8
Figure 4 Getting Started Page
Update the Cisco AP541N software with the latest version by clicking the Software
as shown in
Upgrade link,
Next, we recommend that you:
•
Change the password by clicking Change Administrator Password.
•
Configure the SSID and enable wireless security, by clicking Configure
Wireless Networks (SSIDs).
•
Enable the wireless radio, by clicking Enable Wireless Radio.
•
Assign a new static IP address to the access point if your network devices
are configured with static IP addresses, by clicking Set LAN IP Address.
Figure
4.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Getting Started
Connecting the Access Point to a PC