Cisco Small Business AP541N Administration Manual page 15

1
STEP 7
STEP 8
10
When you have connected to the CCA site and the devices have been discovered,
the Topology Map includes the Cisco AP541N.
Non-Cisco devices connected to the switch are not shown in the Topology
NOTE
map.
Right-click the access point to display the options: Configuration Utility, Properties,
and Annotation.
Click Configuration Utility.
The Access Point Configuration Utility displays in a new window
Figure 4.
Next, we recommend that you:
• Change the password by clicking Change Administrator Password.
• Configure the SSID and enable wireless security, by clicking Configure
Wireless Networks (SSIDs).
• Enable the wireless radio, by clicking Enable Wireless Radio.
• Assign a new static IP address to the access point if your network devices
are configured with static IP addresses, by clicking Set LAN IP Address.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Getting Started
Connecting the Access Point to a PC
as shown in
,