Save Or Import A List Of Known Access Points - Cisco Small Business AP541N Administration Manual

2
STEP 1
STEP 2
STEP 3
34

Save or Import a List of Known Access Points

To save the Known AP List to a file, click Save. The list contains the MAC
addresses of all access points that have been added to the Known AP List. By
default, the filename is Rogue2.cfg. You can use a text editor or Web browser to
open the file and view its contents.
Use the Import feature to import a list of known access points from a saved list.
The list might be from another Cisco access point or created from a text file. If the
MAC address of an access point appears in the Known AP List, it will not be
shown as a rogue.
The file you import must be a plain-text file with a .txt or .cfg extension. Entries in
the file are MAC addresses in hexadecimal format with each octet separated by
colons, for example 00:11:22:33:44:55. Separate the entries with a single space.
For the access point to accept the file, it must contain only MAC addresses.
To import an access point list from a file, do the following:
Choose whether to replace the existing Known AP List or add the entries in the
imported file to the Known AP List.
• Select the Replace radio button to import the list and replace the entire
contents of the Known AP List.
• Select the Merge radio button to import the list and add the access points in
the imported file to the access points currently displayed in the Known AP
List.
Click Browse and choose the file to import.
Click Import.
Once the import is complete, the screen refreshes and the MAC addresses of
the access points listed in the imported file appear in the Known AP List.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Status
Rogue AP Detection