Cisco Small Business AP541N Administration Manual page 112

SNMP
Configuring SNMP on the Access Point
NOTE
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Table 28 SNMP v3 Users (Continued)
Field
Authentication Type
Authentication Key
Encryption Type
Encryption Key
SNMPv3 Users
After you configure the SNMPv3 Users settings, you must click Apply to apply the
changes and to save the settings.
Description
Select the type of authentication to use on SNMP
requests from the user:
MD5—Require MD5 authentication on SNMPv3
requests from the user.
None—SNMPv3 requests from this user require no
authentication.
If you specify MD5 as the authentication type, enter a
password to enable the SNMP agent to authenticate
requests sent by the user.
The passphrase must be between 8 and 32
characters in length.
Select the type of privacy to use on SNMP requests
from the user:
DES—Use DES encryption on SNMPv3 requests from
the user.
None—SNMPv3 requests from this user require no
privacy.
If you specify DES as the privacy type, enter a key to
use to encrypt the SNMP requests.
The passphrase must be between 8 and 32
characters in length.
This field shows the users that you have defined on
the access point. To remove a user, select the user and
click Remove.
5
107