Cisco Small Business AP541N Administration Manual page 38

Status
Rogue AP Detection
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Table 6 Neighboring Access Point Information
Field Description
Shows the Channel on which the detected access point is
Channel
broadcasting.
The channel defines the portion of the wireless radio
spectrum that the wireless radio uses for transmitting and
receiving.
The channel for your access point is set in Wireless >
Advanced Settings. (See
page
Shows the rate (in megabits per second) at which the
Rate
detected access point is currently transmitting.
The current rate is always one of the rates shown in
Supported Rates.
Indicates the strength of the wireless radio signal emitting
Signal
from the detected access point. If you hover the mouse
pointer over the bars, a number appears and shows the
strength in decibels (dB).
Shows the total number of beacons received from the
Beacons
detected access point since it was first discovered.
Shows the date and time of the last beacon received from
Last Beacon
the detected access point.
Shows supported and basic (advertised) rate sets for the
Rates
detected access point. Rates are shown in megabits per
second (Mbps).
All Supported Rates are listed, with Basic Rates shown in
bold.
Rate sets are configured on the Wireless > Advanced
Settings page. (See
74.)
Modifying Advanced Settings,
74.)
Modifying Advanced Settings, page
2
33