Remote & Display Settings - AMX Mio Modero R-4 Operation/Reference Manual

Remote & Display Settings
The device provides you with information concerning current displays settings and allows you to edit the
timeout and brightness. Use the up and down arrows to scroll from viewable page to page.
FIG. 6 Remote & Display Settings Pages
Remote & Display Settings
Display Timeout
Sleep Timeout
LCD
Charge LED
Home Hold Time
Inactivity
Inactivity Page
Panel Type
Firmware Version
ZigBee Version
S/N
Setup Pages Version
Power-up Page
File System
RAM
Setup Port
Mio Modero R-4
The valid display timeout times are 0, 10, 15, 20, 25, and 30 seconds.
The valid sleep timeout times are 0, 3, 5, 10, 15, 30, 60, 120, 180, and 240 
minutes.
The current brightness of the touchscreen display, between 0 and 100.
The current brightness of the LED displaying charging status, between 0 and 100.
The amount of time (in seconds, 0-6) in which the selected home page will be 
displayed.
The amount of time (in minutes, 0-240) spent inactive in its charging cradle before
the unit switches to its inactivity page.
The selected page displayed when the inactivity timer expires.
The type of unit connected to the ZigBee network. This is always R4.
The most current firmware version uploaded to the unit.
The most current version of the ZigBee module firmware uploaded to the device.
The device serial number
The current version of the Setup pages uploaded to the unit.
The page displayed when the unit powers up.
The total and available amounts of storage space in the unit.
The total amount of available RAM in the unit.
The port (usually 0) used to upload information to the unit.
Device Setup Pages
11