AMX Mio Modero R-4 Operation/Reference Manual page 42

Amx corporation zigbee compatible remote control operation/reference guide

Hide thumbs Also See for Mio Modero R-4:

Table of Contents

Programming the Mio R-4

10. Right-click on Empty Device Tree/System and select Refresh System to re-populate the list. 

The Mio R-4 will not appear as a device below the virtual system number (in the Online Tree tab)

until both the system number (default = 1) is entered into the Master Connection section of the

System Settings page and the Mio R-4 is restarted.



The Connection status turns green after a few seconds to indicate an active USB connection to

the PC (Virtual Master).

If the System Connection icon does not turn green, check the USB connection and

communication settings and refresh the system.

Mio Modero R-4

Table of Contents