Send_Commands; Page Commands; Apg; Cpg - AMX Mio Modero R-4 Operation/Reference Manual

SEND_COMMANDs

Below is a list of SEND_COMMANDs accepted by the Mio R-4 from NetLinx masters. To use these
commands, establish a Telnet session from the PC to the NetLinx master. Additionally, you could use
NetLinx Studio 2.4 or the master's web page to send the commands.
All text is based on a Unicode index.

Page Commands

Page Commands are used in the NetLinx Programming Language and are case insensitive.
Page Commands
PAGE
Flip to a specified
page

@APG

Add a popup page
to a popup group

@CPG

Clear all popup
pages from a
popup group
Mio Modero R-4
Flips to a page with a specified page name. If the page is currently active, it will not redraw
the page.
Syntax:
"'PAGE-<page name>'"
Variables:
• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Device,"'PAGE-Page1'"
Flips to page1.
Add a specific popup page to a specified popup group. Add the popup page to a group if it
does not already exist. If the new popup is added to a group which has a popup displayed
on the current page along with the new pop-up, the displayed popup will be hidden and
the new popup will be displayed.
Syntax:
SEND_COMMAND <DEV>,"'@APG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@APG-Popup1;Group1'"
Adds the popup page 'Popup1' to the popup group 'Group1'.
Clear all popup pages from a specified popup group.
Syntax:
SEND_COMMAND <DEV>,"'@CPG-<popup group name>'"
Variable:
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@CPG-Group1'"
Clears all popup pages from the popup group 'Group1'.
Programming the Mio R-4
41