Input Commands; Cal; Vkb; Wake - AMX Mio Modero R-4 Operation/Reference Manual

Remote Run Time Commands (Cont.)

@VKB

Popup the virtual
keyboard

WAKE

Force the remote
out of screen
saver mode

Input Commands

A device must first be defined in the NetLinx programming language with values for the Device: Port:
System. In all programming examples, Remote is used in place of these values.
Input Commands

^CAL

Put remote in 
calibration mode.
Mio Modero R-4
Popup the virtual keyboard.
Syntax:
SEND_COMMAND <DEV>,"'@VKB'"
Example:
SEND_COMMAND Device,"'@VKB'"
Pops-up the virtual keyboard.
Force the remote out of screen saver mode.
Syntax:
SEND_COMMAND <DEV>,"'WAKE'"
Example:
SEND_COMMAND Device,"'WAKE'"
Forces the remote out of the screen saver mode.
Syntax:
"'^CAL'"
Example:
SEND_COMMAND Device,"'^CAL'"
Puts the remote in calibration mode.
Programming the Mio R-4
77