Bww; Cpf; Dpf; Ena - AMX Mio Modero R-4 Operation/Reference Manual

Amx corporation zigbee compatible remote control operation/reference guide
Hide thumbs Also See for Mio Modero R-4:
Table of Contents

Advertisement

Programming the Mio R-4
"^" Button Commands (Cont.)

^BWW

Set the button
word wrap 
feature to those
buttons with a
defined address
range.

^CPF

Clear all page flips
from a button

^DPF

Delete page flips
from button if it
already exists

^ENA

Enable or 
disable buttons
with a set 
variable text
range
58
Set the button word wrap feature to those buttons with a defined address range. By
default, word-wrap is Off.
Syntax:
"'^BWW-<vt addr range>,<button states range>,<word wrap>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
• word wrap = (0=Off and 1=On). Default is Off.
Example:
SEND_COMMAND Device,"'^BWW-500,1,1'"
Sets the word wrap on for the button's Off state.
Clear all page flips from a button.
Syntax:
"'^CPF-<vt addr range>'"
Variables:
• variable text address range = 1 - 4000.
Example:
SEND_COMMAND Remote,"'^CPF-500'"
Clears all page flips from the button.
Delete page flips from button if it already exists.
Syntax:
"'^DFP-<vt addr range>,<actions>,<page name>'"
Variable:
• variable text address range = 1 - 4000.
• actions =
Stan[dardPage] - Flip to standard page
Prev[iousPage] - Flip to previous page
Show[Popup] - Show Popup page 
Hide[Popup] - Hide Popup page
Togg[lePopup] - Toggle popup state
ClearG[roup] - Clear popup page group from all pages
ClearP[age] - Clear all popup pages from a page with the 
ClearA[ll] - Clear all popup pages from all pages
• page name = 1 - 50 ASCII characters.
Example:
SEND COMMAND Device,"'^DPF-409,Prev'"
Deletes the assignment of a button from flipping to a previous page.
Enable or disable buttons with a set variable text range.
Syntax:
"'^ENA-<vt addr range>,<command value>'"
Variables:
• variable text address range = 1 - 4000.
• command value = (0= disable, 1= enable)
Example:
SEND_COMMAND Device,"'^ENA-500.504&510.515,0'"
Disables button pushes on buttons with variable text range 500-504 & 510-515.
specified page name
Mio Modero R-4

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF