Button Commands; Ani; Apf - AMX Mio Modero R-4 Operation/Reference Manual

"^" Button Commands

These Button Commands are used in the NetLinx protocol and are case insensitive.
All commands that begin with "^" have the capability of assigning a variable text address range and
button state range. A device must first be defined in the NetLinx programming language with values
for the Device: Port: System (in all programming examples - Remote is used in place of these values).



"^" Button Commands

^ANI

Run a button 
animation 
(in 1/10 second)

^APF

Add page flip
action to a button
if it does not
already exist
Mio Modero R-4
Variable text ranges allow you to target one or more variable text channels in a single
command.
Button State ranges allow you to target one or more states of a variable text button with a
single command.
The "." Character is used for the 'through' notation, also the "&" character is used for the
'And' notation.
Run a button animation (in 1/10 second).
Syntax:
"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
Variable:
• variable text address range = 1 - 4000.
• start state = Beginning of button state (0= current state).
• end state = End of button state.
• time = In 1/10 second intervals.
Example:
SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
Runs a button animation at text range 500 from state 1 to state 25 for 10 second.
Add page flip action to a button if it does not already exist.
Syntax:
"'^APF-<vt addr range>,<page flip action>,<page name>'"
Variable:
• variable text address range = 1 - 4000.
• page flip action =
• page name = 1 - 50 ASCII characters.
Example:
SEND COMMAND Device,"'^APF-400,Stan,Main Page'"
Assigns a button to a standard page flip with page name 'Main Page'.
Stan[dardPage] - Flip to standard page
Prev[iousPage] - Flip to previous page
Show[Popup] - Show Popup page 
Hide[Popup] - Hide Popup page
Togg[lePopup] - Toggle popup state
ClearG[roup] - Clear popup page group from all pages
ClearP[age] - Clear all popup pages from a page with the 
specified page name
ClearA[ll] - Clear all popup pages from all pages
Programming the Mio R-4
49