Bmf - AMX Mio Modero R-4 Operation/Reference Manual

Programming the Mio R-4
"^" Button Commands (Cont.)

^BMF

Set any/all button
parameters by
sending 
embedded codes
and data
54
Set any/all button parameters by sending embedded codes and data.
Syntax:
"'^BMF-<vt addr range>,<button states range>,<data>'"
Variables:
• variable text address char array = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
• level range = 1 - 600 (level value is 1 - 65535).
• data:
• '%B<border style>' = Set the border style name. See theBorder Styles by Numbers table
on page 38.
• '%B',<border 0-27,40,41> = Set the borer style number. See theBorder Styles by
Numbers table on page 38.
• '%DO<1-5><1-5><1-5><1-5><1-5> = Set the draw order. Listed from bottom to top.
Refer to the ^BDO command on page 52 for more information.
• '%F',<font 1-8,10,11,20-29,32-xx> = Set the font.
• '%F<font 01-08,10,11,20-29,32-xx>' = Set the font.
• '%MI<mask image>' = Set the mask image. Refer to the ^BMI command on page 55 for
more information.
• '%T<text >' = Set the text using ASCII characters (empty is clear).
• '%P<bitmap>' = Set the picture/bitmap filename (empty is clear).
• '%I',<icon 01-9900, 0-clear>' = Set the icon using values of 01 - 9900 (icon numbers are
assigned in the TPDesign4 Resource Manager tab - Slots section).
• '%I<icon 01-9900, 0-clear>' = Set the icon using values of 01 - 9900 (icon numbers are
assigned in the TPDesign4 Resource Manager tab - Slots section).
• '%J',<alignment of text 1-9> = As shown the following telephone keypad alignment
chart:
0
1 2 3
Zero can be used for an absolute position
4 6
5
7 8 9
• '%JT<alignment of text 0-9>' = As shown the above telephone keypad alignment chart,
BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
• '%JB<alignment of bitmap/picture 0-9>' = As shown the above telephone keypad
alignment chart BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
• '%JI<alignment of icon 0-9>' = As shown the above telephone keypad alignment chart,
BUT the 0 (zero) is absolute and followed by ',<left>,<top>'
• '%R<left>,<top>,<right>,<bottom>' = Set rectangle.
Mio Modero R-4