Viewing Project Information; Remote & Display Settings - AMX MIO-R4 Instruction Manual

Device Setup Pages
Project Information (Cont.)
File Revision
Dealer ID
Job Name
Sales Order
Purchase Order
Build Number
Charger Sensor Port
Charger Sensor Channel The channel number for the charger sensor.
Creation Date
Revision Date
Last Save Date
Job Comments

Viewing Project Information

1.
Select Project Information from the Setup Menu.
2.
Use the Up/Down touchscreen arrows to view each page.
3.
When finished, select the Back button until you are out of the Setup Menu.
Remote & Display Settings
The device provides you with information concerning current displays settings and allows you to edit the timeout and
brightness. Use the up and down arrows to scroll from viewable page to page.
FIG. 6 Remote & Display Settings Pages
10
The revision number for the control pages.
The ID of the dealer associated with the control pages.
A friendly name for the job associated with the control pages.
The sales order number for the job.
The purchase order number for the job.
The current build version number for the device firmware.
The port number for the charger sensor.
The date the control pages were created.
The date of the last revision for the control pages.
The date of the last save for the control pages.
Any additional comments added in the designing application.
Mio Modero R-4 Remote