InFocus LP260 User Manual page 45

4 Remove the two screws on the outside of the module, then
grasp the handle and pull the module out (Figure 17). Dispose
of the lamp module in an environmentally proper manner.
lamp cover
F 16
IGURE
Removing the lamp cover
F 17
IGURE
Removing the lamp module
WARNING: Be extremely careful
when removing the lamp module.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp mod-
ule is designed to contain these
fragments, but use caution when
removing the lamp module.
CAUTION: Never operate the
projector with the lamp door open
or removed. This disrupts the air
flow and causes the projector to
overheat.
37