InFocus LP260 User Manual page 35

Video System menu
1 Press the button, navigate to the System menu, then
menu
press the button.
select
The "Video System" menu appears.
2 Press the
point down
desired source.
When the video signal is from the Video or S-Video jack:
Auto
In this mode, the projector automatically detects the incoming
video source and adjusts itself to optimize performance. When
the video system is PAL-M or PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector can't display the proper video signal, select the
broadcast signal format from the menu.
system menu
button and position the red arrow by the
27