InFocus LP260 User Manual page 28

U s i n g t
20
h e P r o
3 Move to the parameter you want to change using the
buttons, and adjust each setting using the
down
buttons.
4 Navigate to "Save" and press the
The parameter is memorized in the selected mode.
5 To activate the mode, select it in the System Select menu (see
"System Menu" on page 18.)
Total Lines
The number of vertical lines.
Horiz. Size
The number of dots in one horizontal period.
H Position/V Position
The left/right and up/down position of the image.
Clamp
The clamp level. If the image has dark bars, use this adjustment.
j e c t o r
point right/left
button.
select
point up/