Setting Up The Projector - InFocus LP260 User Manual
Infocus projector user's guide lp260
Hide thumbs
Also See for LP260:
- Connection instruction (3 pages) ,
- Quick start (2 pages) ,
- Introduction (4 pages)
Table of Contents
Advertisement
SETTING UP THE PROJECTOR
1 Place the projector on a flat surface.
The projector must be within 10 feet (3 m) of your power
•
source and within 6 feet (1.8 m) of your computer.
If you want to project from behind a translucent screen, set
•
up the projector behind your screen. See "Rear" on page 33
to reverse the image.
2 Position the projector the desired distance from the screen.
The distance from the lens of the projector to the screen and
•
the zoom setting determine the size of the projected image.
Figure 3 and Table 1 show projected image sizes.
4.6' (1.4m)
36"
30"
Screen Size
30"
(W x H) mm
610 x 457 1219 x 914 2032x1524 3048x2286 4064x3048
Height (H1)
16.6"
(422mm)
Height (H2)
1.4"
(35mm)
3 Make sure the projector and the computer are turned off.
13.1' (4.0m)
7.8' (2.4m)
100"
60"
83"
50"
Table 1:
Image Size, Width and Height
60"
100"
33.2"
55.4"
(844mm)
(1407mm)
2.8"
4.6"
(70mm)
(117mm)
26.3' (8.0m)
200"
19.7' (6.0m)
150"
Max Zoom
125"
Min Zoom
F
IGURE
Projected image sizes
150"
200"
83.1"
110.8"
(2110mm)
(2814mm)
6.9"
9.2"
(176mm)
(234mm)
167"
H1
H2
3
5
Advertisement
Table of Contents
Troubleshooting
