Turning Off The Projector - InFocus LP260 User Manual

S e t t i n g
NOTE: With some computers,
the order in which you power up
the equipment is very important.
Most computers should be turned
on last, after all other peripherals
have been turned on. Refer to your
computer's documentation to
determine the correct order.
NOTE: To maximize lamp life,
allow the projector to run for at
least five minutes before turning
10
u p t h e
5 Turn on your computer.
The computer image should display on the projection
•
screen. If a video source is active, press the
the keypad or the
your computer's image. Make sure your laptop's external
video port is activated; see "Portable and Laptop Activation
Chart" on page 46 for details.
If necessary, make adjustments to the image using the pro-
•
jector's on-screen menus. To open the menus, press the
menu
desired menu. For more information about the menus, see
page 17.

Turning Off the Projector

If you want to turn off the image for a short period of time, press
the button on the remote. This blanks the screen, but keeps
Blank
the projector running. To exit Blank mode, press the
again or any other function button.
To turn off the projector, press the
"Power off?" appears on the screen. Press the
to turn the projector off. The Lamp indicator lights, and the
Ready indicator dims. The fans run for 90 seconds after the pro-
jector is turned off. When the projector has cooled, the Ready
indicator lights green, indicating you can turn the projector back
it off.
on if desired.
P r o j e
computer
button on the keypad or remote, then select the
c t o r
source
button on the remote to display
button. The message
Power
Power
button on
button
Blank
button again