InFocus LP260 User Manual page 33

Screen menu
1 Select the Screen menu.
The "Screen Adjustments" menu appears.
.
2 Move the cursor to the desired feature.
True
Select True to display the image in its original size. If the original
size is larger than 800x600, the projector enters Digital Zoom
automatically.
Keystone
Select Keystone to adjust the image vertically and make a squarer
image. The menus disappear and the message "Keystone"
appears. Adjust the keystone using the
on the remote or the
page 12 for details.
Digital Zoom
To adjust the image size or pan a computer image, select Digital
Zoom. The menus disappear and the message "D.Zoom"
appears. The projector also enters digital zoom mode when the
button on the remote is pressed.
d.zoom
To expand the image size, press the
button. The image is magnified by degrees.
To compress the image size, press the
button. The image is reduced by degrees.
right click
To pan the image, press the
Panning only works when the image is larger than the screen
size.
To exit digital zoom mode, press any button except
, , or
select right click
the button on the remote.
normal
buttons on the keypad. See
point up/down
d.zoom up
d.zoom down
up/down/left/right buttons.
point
. To display the image at 800x600, press
point
screen menu
buttons
keystone up/down
button or the
button or the
d.zoom
NOTE: True and Digital Zoom
are not available when RGB,
HDTV1035i, or HDTV1080i is
selected in the System menu.
NOTE: Images not in the projec-
tor's native resolution of SVGA
800x600 are automatically modi-
select
fied to fit the screen in the initial
mode.
NOTE: Panning may not function
if the incoming signals have been
,
modified in the "PC Adjust" menu.
25