Display Symbols - Polar Electro S120 User Manual

DISPLAY SYMBOLS

l
Indicates an ongoing heart rate measurement and flashes to the beat
of your heart.
Indicates there has not been heart rate reception for at least 5 seconds.
--
Indicates there is no heart rate reception.
Time of Day mode: the alarm is on.
Recording mode: beeps if you are exercising outside your target heart
rate zone.
Recording mode: Indicates the heart rate above the target heart rate
zone.
Recording mode: Indicates the heart rate below the target heart rate
zone.
The graphic bar consists of five blocks. A flashing block indicates the
current level in the Options settings or File recalling menus.
Continuously running bars indicate that exercise is being recorded.
Options mode: Indicates that you are setting the bike functions.
HR measurement and Recording modes: Indicates that speed
measurement is on. File mode: Indicates cycling information.
Indicates the highest heart rate during the exercise.
MAX
Indicates average heart rate during the exercise.
AVG
MAX %
Indicates that the heart rate is displayed as a percentage of your
maximum heart rate.
CD Indicates that the independent timer is set as a CountDown Timer.
CU Indicates that the independent timer is set as a CountUp Timer.
In the upper row: lap time.
Lp
Sw In the upper row: stopwatch.
Avg In the upper row: average speed of the exercise.
In the upper row: maximum speed of the exercise.
Max
In the upper row: current speed.
Spd
46
46