Table of Contents
Advertisement
Switching the PC on and off
Switching on the PC
Ê
Switch the monitor on (see the Operating Manual for the monitor).
Ê
Switch the system unit on with the main switch at the rear of the system unit.
Ê
If the power-on indicator lights orange, press the ON/OFF switch at the front of the system unit.
The power-on indicator lights green and the PC is started.
If you have assigned the system password, you must enter this when requested to do so,
i
in order to start the operating system.
Switching off the PC
Your PC is equipped with a Save-to-RAM function. When it is switched off with the ON/OFF switch,
the system state is saved so that the last applications opened are available again very quickly after
switch-on.
Switching off PC with Save-to-RAM function
Ê
Briefly (<4 seconds) press the ON/OFF switch.
The system state is saved. The system unit switches into the "ready-to-operate" mode.
When the system unit is operated in the Save-to-RAM mode, the power-on indicator flashes
green/orange. The system unit uses a minimum of electricity.
Switching off PC completely
Ê
Shut down the operating system Windows properly in the Start menu via the Quit function.
Ê
Switch the system unit off with the main switch.
When the system unit is switched off completely the power-on indicator is dark after a few seconds.
The system unit no longer uses any power.
The main switch and the ON/OFF switch do not disconnect the system unit from the line
!
voltage. To disconnect the line voltage completely, remove the power plug from the
socket.
Ê
Switch the monitor off (see the Operating Manual for the monitor).
A26361-K619-Z100-1-7619
Preparation for use and operation
17
Advertisement
Table of Contents
