Setting Up The Pc - Fujitsu Siemens Computers JETSON Operating Manual

Preparation for use and operation

Setting up the PC

When installing your PC, give consideration to the recommendations on video workstation
!
ergonomics in the manual "Safety, Guarantee and Ergonomics".
Do not expose the PC to extreme environmental conditions (see chapter
data"). Protect it from dust, humidity and heat.
The space around the system unit must be at least 7 in (200 mm) on the left and right in
the horizontal operating position, or at the top in the vertical operating position so that the
system unit is sufficiently ventilated. Do not cover the ventilation areas of the monitor and
the system unit.
The system unit can operate in either a horizontal or vertical position.
Vertical operating position
A vertical operating position is only permissible with stand-up feet. The stand-up feet prevent the
device from falling over and ensure proper ventilation.
The set-up direction is specified: The covered USB ports must be at the bottom.
!
Ê
Assemble the stand-up feet.
Ê
Mount the stand-up feed on the right side of the unit.
We recommend that you place your equipment on a surface with good anti-slip qualities. In view of
the multitude of different finishes and varnishes used on furniture, it is possible that the rubber /
plastic feet of the devices will mark the surface they stand on.
8
Setting up the PC
"Technical
A26361-K619-Z100-1-7619