Table of Contents
Advertisement
Preparation for use and operation
Switching on the PC for the first time
When you switch on your PC for the first time the supplied software is set up and configured.
The software required for the initial installation already exists on the hard disk. The
i
supplied Recovery CD or the CD "Drivers & Utilities" would therefore not be required for
this process.
If you require the license number of Windows, you will find it either on a sticker on your PC or
printed on the front cover of the Windows manual provided.
If the PC is integrated into a network, the user and server details as well as the network protocol are
required. Contact your network administrator if you have any questions about these details.
When you start up the PC for the first time, only the monitor, the keyboard and the mouse
i
should be connected. You can connect other devices after the initial installation.
Ê
Switch your monitor on.
Ê
Switch the system unit on with the main switch at the rear of the system unit.
Ê
Switch the system unit on with the ON/OFF switch.
Ê
If the power-on indicator lights orange, press the ON/OFF switch at the front of the system unit.
The power-on indicator lights green and the PC is started.
Ê
Adjust the brightness if necessary (see the Operating Manual for the monitor).
Once the installation has been started the PC must not be switched off.
i
You should only reboot the PC during installation if you are requested to do so. Otherwise
the installation will be not be performed correctly. If a fault occurs in the installation the
contents of the hard disk must be completely restored.
Ê
During installation follow the instructions on the screen.
Consult the operating system manual if there is anything unclear about the requested input data.
You will find further information about the system, drivers, utilities, updates, and manuals
i
etc. on the "Drivers & Utilities" CD supplied.
16
Switching the PC on and off
A26361-K619-Z100-1-7619
Advertisement
Table of Contents
