Fujitsu Siemens Computers JETSON Operating Manual page 41

Installing drive carrier
Ê
If you previously disconnected them, plug the data and power cable connectors back into the
hard disk and the CD-ROM or DVD drive.
Ê
Mount the drive carrier in the bracket again (1), slide it into position (2) and secure it with the
screw (3). Make sure that no cables get pinched underneath the drive carrier.
Make sure that the cable of the hard disk drive is not damaged.
!
Ê
Close the system unit (see
A26361-K619-Z100-1-7619
3
1
"Assembling the system
System expansions
2
unit").
33