Ptt Call To Multiple Handsets - AT&T CL82113 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple handsets

When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls
when one to five handsets are registered, and a maximum of one-to-three
calls when six or more handsets are registered. The first four registered
handsets will be able to use this feature. Other handsets can only use PTT for
one-to-one calls.
To call multiple handsets:
1. You have three ways to call multiple handsets. When the handset is not
in use:
Press and hold PUSH TO TAL� until the handset shows
•
Connecting to group...
Press PUSH TO TAL�. Press q
•
/SELECT or press PUSH TO TAL� and your handset shows
MENU
Connecting to group...
• Press PUSH TO TAL�. Press TONE followed by # (pound key). The
handset shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other handsets automatically
activate.
2. You need to press and hold PUSH TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all handsets.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call on page 36).
NOTE: After PUSH TO TAL� on the handset is released, the PTT call remains open for a short
time. If no one presses PUSH TO TAL� on the handset within ten seconds, the PTT call ends
automatically.
or p
to choose Group. Press
CID DIR
35