Getting started
Battery installation and charging
CHARGE light
After you install your telephone or power returns following
a power outage, the handset will prompt you to set the date
and time. For instructions, see Set date/time on page 13. To
skip setting the date and time, press
handset.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT183342) .
•
To order, visit our website at
1 (800) 222-3111
•
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
Step 3
Charge the handset by placing it face forward
in the telephone base or charger. The CHARGE
light on the handset is on during charging.
OFF
www.telephones.att.com
1 (866) 288-4268
.
In Canada, dial
8
/CANCEL on the
SET DATE
MM/DD/YY
SET TIME
HH:MM --
or call
.