Blind Transfer - AT&T CL82113 User Manual

Telephone operation
Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific handset or
any handset without notifying them.
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/
2. Press /SELECT again to choose Transfer.
MENU
• If you have a two-handset system, the outside call is
put on hold and your handset shows Transferring call...
The other handset rings and shows Transfer from other
handset.
• If you have more than two handsets, your screen
shows TRANSFER TO: Use the dialing keys to e e nter a
specific handset number (1-9 for handsets 1-9,
followed by 0-2 for handsets 10-12, or TONE followed
by # for all handsets),
to the desired handset and press
outside call is put on hold and your handset screen
shows Transferring call... or Transferring call to all...
The other handset rings and shows Transfer from
HANDSET X
handset number).
3. To answer the call on the destination handset, press
/SPEA�ER SPEA�ER,
shows Call transferred and goes to idle mode.
NOTES:
• To cancel the transfer and return to the external call before the blind transfer call is answered,
press /CANCEL,
OFF
• If the other handset does not answer the transfer within 30 seconds, the transfer ends and the
initiating handset rings while showing No response to transfer. If it does not pick up within 30
seconds, the handset returns to idle mode and the outside call ends.
SELECT
or press
(HANDSET represents the handset name, X represents the
or any dialing key (0-9, TONE
PHONE/
FLASH
.
q or p
CID DIR
/SELECT.
MENU
, press
or /SPEA�ER SPEA�ER on your handset.
28
Phone
8/06
>Transfer
Intercom
TONE
to scroll
TRANSFER TO:
The
>Handset
PHONE/
or #). The initiating handset
0:00:12
6:30
AM
2
,
FLASH