Ptt Call To Multiple Handsets - AT&T CL81114 Complete User's Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple handsets

When there are multiple handsets registered to the phone system,
PTT supports one-to-group calls. PTT supports a maximum of
one-to-four calls when one to five handsets are registered, and
a maximum of one-to-three calls when six or more handsets are
registered. The first four registered handsets will be able to use
this feature. Other handsets can only use PTT for one-to-one calls.
To call multiple handsets:
1. You have three ways to call multiple handsets. When the handset
is not in use:
• Press and hold
Connecting to group....
• Press
Press
shows Connecting to group....
• Press
key). The handset shows Connecting to group....
When the connection is made, both the caller and the
destination parties hear a beep. The speakerphones on all
other handsets automatically activate.
2. You need to press and hold
speak. Speak towards the handset. Your voice is broadcast to
all handsets.
3. Release
4. Any extension can reply (see Answer a PTT call on page 42).
NOTE: After
open for a short time. If no one presses
ten seconds, the PTT call ends automatically.
until the handset shows
. Press
or press
. Press
after speaking.
on the handset is released, the PTT call remains
41
or to choose Group.
and your handset
followed by # (pound
when you want to
on the handset within