Apm Submenu; Acpi Submenu - Intel D815EGEW Product Manual

APM Submenu

To access this menu, select Power on the menu bar, then APM.
Maintenance
Table 25 shows the options available for setting the APM features.
Table 25.

APM Submenu

Feature
Power Management
Inactivity Timer
Hard Drive

ACPI Submenu

To access this menu, select Power on the menu bar, then ACPI.
Maintenance
The submenu represented in Table 26 is for setting the ACPI features.
Table 26.

ACPI Submenu

Feature
ACPI Suspend State
Video Repost
(This feature is present
only when ACPI Suspend
State is set to S3)
Wake on LAN from S5
Main Advanced
Options
• Disabled
• Enabled (default)
• Off
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes (default)
• 30 Minutes
• 60 Minutes
• 120 Minutes
• Disabled
• Enabled (default)
Main Advanced
Options
• S1 State (default)
• S3 State
• Disabled (default)
• Enabled
• Stay Off (default)
• Power On
Security Power
APM
ACPI
Description
Enables or disables the APM feature.
Specifies the amount of time before the computer enters
APM standby mode.
Enables power management for hard disks during APM
standby mode.
Security Power
APM
ACPI
Description
Specifies the ACPI sleep state.
The wake jumper must be set to wake from PS/2 device
or USB device under S3 state.
Allows the video BIOS to be initialized coming out of the
S3 state. Some video controllers require this option to
be enabled. This feature is present only if the ACPI
suspend state is set to S3 state. See page 35 for more
information on how to set the jumper blocks.
In ACPI soft-off mode only, determines how the system
responds to a LAN wake up event when the system is in
the ACPI soft-off mode.
Using the Setup Program
Boot Exit
Boot Exit
61