Diskette Configuration Submenu - Intel D815EGEW Product Manual

Intel Desktop Board D815EGEW Product Guide
Table 18. Primary/Secondary IDE Master/Slave Submenus (continued)
Feature
Ultra DMA
(Note)
Cable Detected
Note: These configuration options appear only if an IDE device is installed.

Diskette Configuration Submenu

To access this menu, select Advanced on the menu bar, then Diskette Configuration.
Maintenance
Table 20 shows the features used for configuring the diskette drive.
Table 20.

Diskette Configuration Submenu

Feature
Diskette Controller
Floppy A
Diskette Write-Protect
56
Options
• Disabled (default)
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
None
Main Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
Options
• Disabled
• Enabled (default)
• Not Installed
• 360 KB
5¼"
• 1.2 MB
5¼"
• 720 KB
3½"
• 1.44/1.25 MB 3½" (default)
• 2.88 MB
3½"
• Disabled (default)
• Enabled
Description
Specifies the Ultra DMA mode for the drive.
Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
Security Power
Description
Disables or enables the integrated diskette
controller.
Specifies the capacity and physical size of
diskette drive A.
Disables or enables write-protect for the
diskette drive.
Boot Exit