APM Submenu
To access this menu, select Power on the menu bar, then APM.
Maintenance
The submenu represented in Table 24 is for setting the APM features.
Table 24.
APM Submenu
Feature
Power Management
Inactivity Timer
Hard Drive
ACPI Submenu
To access this menu, select Power on the menu bar, then ACPI.
Maintenance
The submenu represented in Table 25 is for setting the ACPI features.
Table 25.
ACPI Submenu
Feature
ACPI Suspend State
Video Repost
(This feature is present
only when ACPI Suspend
State is set to S3)
Wake on LAN from S5
Main
Advanced
Options
• Disabled
• Enabled (default)
• Off
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes (default)
• 30 Minutes
• 60 Minutes
• 120 Minutes
• Disabled
• Enabled (default)
Main
Advanced
Options
• S1 State
• S3 State (default)
• Disabled (default)
• Enabled
• Stay Off (default)
• Power On
Security Power
APM
ACPI
Description
Enables or disables the APM feature.
Specifies the amount of time before the computer enters
APM standby mode.
Enables power management for hard disks during APM
standby mode.
Security Power
APM
ACPI
Description
Specifies the ACPI sleep state.
Allows the video BIOS to be initialized coming out of the
S3 state. Some video controllers require this option to
be enabled. This feature is present only if the ACPI
suspend state is set to S3 state.
In ACPI soft-off mode only, determines how the system
responds to a LAN wake up event when the system is in
the ACPI soft-off mode.
Using the Setup Program
Boot
Exit
Boot
Exit
73