Table of Contents
Advertisement
28
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the slots on the status-light board with the alignment posts on the palm-rest
assembly and secure the status-light board in place.
2
Replace the screw that secures the status-light board to the palm-rest assembly.
3
Route the status-light board cable through the routing guides on the palm-rest
assembly.
Postrequisites
1
Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
2
Replace the dispaly assembly. See "Replacing the Display Assembly" on page 48.
3
Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38.
4
Replace the keyboard. See "Replacing the Keyboard" on page 35.
5
Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
6
Replace the base cover. See "Replacing the Base Cover" on page 15.
7
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
8
Follow the instructions in "After Working Inside Your Computer" on page 11.
56
|
Replacing the Status-Light Board
Replacing the Status-Light
Board
Before working inside your computer, read the safety
Advertisement
Table of Contents
